VeraCrypt Turns Any USB Stick Into a Safe

Build an encrypted container or lock the whole stick, choose a password that holds up, and learn why a forgotten one is final.

FREE$34.95UpdateStar PremiumShare a link to claimA USB stick is the easiest thing in the world to lose. It slips out of a jacket pocket on the train, stays plugged into a conference-room PC, rolls under the car seat. Usually that's a shrug and a few euros. But if that stick holds your tax return scans, a passport copy or the client files from work, the finder gets all of it, no password asked.

VeraCrypt fixes that for free. The open-source encryption tool (current version: 1.26.30) builds an encrypted volume that looks like random noise to anyone without the password. You can go two ways: an encrypted file container that sits on the stick next to normal files, or encryption of the whole stick. We start with the container, because VeraCrypt's own wizard calls it the option recommended for inexperienced users.

Step 1: Start the wizard

Install VeraCrypt from its product page, plug in your USB stick, then:

  1. Launch VeraCrypt and click Create Volume.
  2. Leave Create an encrypted file container selected and click Next.
  3. Keep Standard VeraCrypt volume and click Next again.

VeraCrypt Volume Creation Wizard with the Create an encrypted file container option highlighted The container option is selected by default, which is exactly what you want here.

Step 2: Place the container on the stick

  1. Click Select File....
  2. Browse to your USB stick, type a new file name such as vault.hc and click Save.
  3. Click Next.

Careful here: VeraCrypt doesn't encrypt an existing file you pick. It overwrites it with the new container. Always type a fresh name.

On the next page you choose the encryption and hash algorithms. The defaults are fine; click Next.

Step 3: Choose the size and filesystem

Type the container size, for example 8 GB on a 32 GB stick, and click Next. Leave room on the stick for the VeraCrypt files you may want to carry (more on that below).

Later in the wizard you can pick the filesystem inside the container. If you plan to store single files bigger than 4 GB, such as videos or disk images, choose NTFS or exFAT, since FAT tops out at 4 GB per file.

Step 4: Set a password that actually protects

This is the step that decides whether the whole exercise is worth it. VeraCrypt's guidance is blunt: no dictionary words, no names, no birthdays. Use a random mix of upper and lower case letters, numbers and special characters, and go for more than 20 characters. The maximum is 128.

A sentence-style passphrase you can remember beats a short cryptic one you'll forget. Type it in Password and again in Confirm, then click Next. The button stays disabled until both fields match.

VeraCrypt Volume Password page with Password and Confirm fields filled in Both fields must match before Next becomes clickable.

Step 5: Wiggle the mouse and format

Now VeraCrypt asks you to move the mouse randomly inside the wizard window. This sounds silly, but it feeds the random number generator that creates your encryption keys. Keep going at least until the randomness bar turns green (VeraCrypt recommends 30 seconds or more), then click Format.

Depending on the size and the speed of your stick, formatting can take a while. When the success message appears, click OK and then Exit.

Step 6: Mount, use, unmount

The container is just a file until you mount it. To open it:

  1. In the main VeraCrypt window, click a free drive letter in the list.
  2. Click Select File..., choose vault.hc on your stick and click Open.
  3. Click Mount, type your password and click OK. If you're unsure about the KDF setting in the password dialog (older versions called it PRF), leave it on Autodetection; mounting just takes a bit longer.

Your vault now shows up in File Explorer as a normal drive. Drag files in and out as usual: VeraCrypt encrypts and decrypts on the fly in memory, and nothing decrypted is written to disk.

When you're done, select the volume in VeraCrypt and click Unmount, then eject the stick in Windows. Pulling the stick while the volume is still mounted can cost you data.

VeraCrypt main window with a mounted container on drive M highlighted and the unmount button marked Older screenshot: since version 1.26.20 the button reads Unmount instead of Dismount.

Copied existing files into the vault? Delete the unencrypted originals afterwards, ideally with a secure-erase tool, or they stay readable on the stick.

Option B: Encrypt the whole stick

If you want the entire stick encrypted, choose Encrypt a non-system partition/drive in Step 1, keep Standard VeraCrypt volume, click Select Device... and pick your USB stick. Double-check the drive, because the next choice matters: Create encrypted volume and format it wipes everything on the stick, while Encrypt partition in place keeps existing data but only works with NTFS-formatted drives. Creating a device-hosted volume needs administrator rights.

To open the stick later, click Auto-Mount Devices in the main window. One trap: when you plug the encrypted stick into a PC, Windows may claim it needs to be formatted. Don't click that. Formatting destroys the encrypted volume.

Taking the vault to other PCs

Any PC that should open your vault needs VeraCrypt. On machines where you can't install it, the portable version helps: run the installer and choose Extract instead of Install, then copy the files to the unencrypted part of your stick. VeraCrypt's own documentation notes that portable mode still requires administrator rights, so a locked-down work PC may not cooperate.

A small heads-up for screenshot fans: since version 1.26.24, VeraCrypt on Windows protects its windows against screenshots and screen recording by default.

If you forget the password

Then the data is gone. VeraCrypt has no backdoor and never will, by design. No support hotline, no recovery email. What you can do is back up the volume header right after creating the vault via Tools > Backup Volume Header. That protects against a damaged header, and it's restored together with the password that was valid when you made the backup. It does not help if you never knew the password to begin with, so write yours down and keep it somewhere safe, like a password manager.

Our verdict

VeraCrypt is the right tool for anyone who carries sensitive files on a stick and wants strong, free encryption without a cloud account. The container route is quick and forgiving, and whole-stick encryption suits drives that should never show readable data at all. Do this today: create a small test container, put one unimportant file in it, unmount it and mount it again. Once that works, move the real files in.

Related on UpdateStar

about author