BlueStacks lagging? Five fixes for smoother games

Check that virtualization is on, sort out Hyper-V, and give BlueStacks the cores, memory and frame rate your game needs.

FREE$34.95UpdateStar PremiumShare a link to claimThe match starts, everyone runs for the same spot, and your screen turns into a slideshow. On your phone the same game runs fine, so the PC should manage too. Usually it can. Out of the box, though, BlueStacks often runs with half its options switched off, and the biggest one isn't even inside BlueStacks. It sits in your PC's firmware.

Trick 1: Check whether virtualization is on

BlueStacks runs Android in a virtual machine. Without the processor's virtualization feature (Intel VT-x, AMD-V or SVM on AMD boards), it's stuck on a single CPU core, and BlueStacks itself puts the gain from switching it on at five times the performance. It also needs virtualization for its 64-bit Android instances.

Checking takes ten seconds:

  1. Press Ctrl+Shift+Esc to open Task Manager.
  2. Click Performance and select CPU.
  3. Look at the line Virtualization below the graph.

If it says Enabled, skip to Trick 3. If it says Disabled, keep reading.

Trick 2: Turn on virtualization in the UEFI

The switch lives in your PC's UEFI (often still called the BIOS), outside Windows. Open this article on your phone first, because the PC is about to restart.

  1. Open Settings > System > Recovery. On Windows 10 it's Update & Security > Recovery.
  2. Next to Advanced startup, click Restart now.
  3. On the blue screen, select Troubleshoot > Advanced options > UEFI Firmware Settings, then Restart.

Windows Recovery Environment Choose an option screen with the Troubleshoot tile highlighted The route to the UEFI starts at Troubleshoot in the Windows recovery screen.

The PC restarts into its firmware menu. Every manufacturer lays it out differently, so look rather than guess. On many boards you switch to an advanced view first (often with F7), then open Advanced > CPU Configuration.

  • With an Intel CPU, set Intel Virtualization Technology to Enabled. Some systems list VT-x and VT-d separately; enable what's there.
  • With an AMD CPU, set SVM Mode to Enabled. Some boards call it AMD-V.

Save and exit (often Save changes & reset). Change nothing else in there. A wrong setting in the UEFI can keep Windows from starting. If you don't see the UEFI option in step 3, press your manufacturer's setup key right after switching on, commonly F2, F10, F12 or Del. When Windows boots too fast for that, turning off Fast Startup gives you more time.

Trick 3: Stop fighting Hyper-V, update instead

For years, BlueStacks and Microsoft's own hypervisor didn't get along. If you used WSL or Windows Sandbox, you had to pick a side. That conflict is mostly history: from BlueStacks 5.20 on, the app runs with Hyper-V on or off. On an older build, updating BlueStacks is the first fix to try.

If BlueStacks refuses to launch with Hyper-V enabled, versions from 5.14 on show a pop-up with Run tool. That starts BlueStacks' Hyper-V Diagnostic Tool, which finishes a half-enabled Hyper-V setup and, where Windows requires it, runs BlueStacks with administrator rights. Tick Apply on every launch so you don't get the prompt each time. As a manual fallback, right-click the BlueStacks icon and choose Run as administrator.

Trick 4: Give BlueStacks more cores and memory

With virtualization on, BlueStacks can use more than one core. You still have to tell it to.

  1. In BlueStacks, click the gear icon on the side toolbar to open Settings.
  2. Stay on the Performance tab.
  3. Under CPU allocation and Memory allocation, pick higher values, or choose Custom to set exact numbers.
  4. Click Save changes, then Restart now.

BlueStacks Settings, Performance tab with CPU allocation, Memory allocation and Performance mode highlighted

BlueStacks' own rule of thumb: 4 cores and 4 GB for graphics-heavy games such as Free Fire, 2 cores and 2 GB for lighter ones like Among Us. Don't hand over every core your CPU has, because Windows still needs some to run everything else.

Right below sits Performance mode, and it matters more than it looks. BlueStacks ships with Low memory, which suits several instances at once. On a PC with 8 to 16 GB of RAM, Balanced is the better pick if you keep other apps open. With more than 16 GB and nothing else running, choose High Performance. The mode applies to all instances and also needs a restart.

If BlueStacks won't even open to reach these settings, use the Multi-instance Manager instead. Click the gear icon next to the instance, change cores and memory there, save, and click Start.

Trick 5: Set the frame rate on purpose

The Frame rate slider on the same tab controls how many frames per second BlueStacks renders. BlueStacks recommends 60 FPS for smooth play and 20 FPS per instance if you run several at once. That second number is a quick win when you farm in multiple windows.

Some games run above 60. For those:

  1. On the Performance tab, turn on Enable high frame rate.
  2. Move the slider up, as far as 240.
  3. Click Save changes and Restart now.

BlueStacks Performance tab with Enable high frame rate turned on and the frame rate slider at 240

High frame rates only pay off in games that support them, and BlueStacks pairs them with High Performance mode and enough cores. On a weaker laptop, a steady 60 feels better than a stuttering 120.

Still lagging after all five? Update your graphics driver, and on laptops with two GPUs make sure BlueStacks runs on the dedicated one, not the integrated chip.

Our verdict

Anyone whose BlueStacks crawls on a decent PC should start with the Task Manager check from Trick 1. It takes ten seconds and tells you whether the real fix is in the firmware or in BlueStacks' settings. After that, set Performance mode to match your RAM.

Related on UpdateStar

about author