Audacity 4: Record Anything Your PC Plays

Audacity 4 moved things around, but WASAPI loopback still lets you capture any sound your Windows PC plays.

FREE$34.95UpdateStar PremiumShare a link to claimA livestream with a great Q&A that never got archived. The audio from a web seminar you'd like to listen to on the train. A clip from your own video project whose source file vanished with an old laptop. Sometimes the only copy of a sound is the one coming out of your speakers right now. Audacity can grab it, and in Audacity 4 the trick still works, it just lives in a different place than before.

Audacity 4 is a big rebuild with a new interface, and the current release is 4.0.1. Plenty of older guides point to toolbars and dropdowns that no longer look the same. This walkthrough uses the Audacity 4 layout on Windows, where the feature is called WASAPI loopback. Please only record material you're allowed to keep, such as your own content, free broadcasts for private use or recordings you have permission for.

Step 1: Switch the audio host to Windows WASAPI

Loopback recording only exists with one specific Windows audio system, so that's the first switch to flip.

  1. Start Audacity 4 and click Audio setup in the toolbar (the button with the wrench icon).
  2. Point to Host.
  3. Choose Windows WASAPI. A check mark shows it's active.

The other entries, MME and Windows DirectSound, are older audio paths. They're fine for a microphone but don't offer loopback devices. If WASAPI is already ticked, you can move straight on.

Step 2: Pick the loopback version of your output device

Now tell Audacity to listen to your speakers or headphones instead of a microphone.

  1. Click Audio setup again and point to Recording device.
  2. Look for the device you are listening on right now, with (loopback) at the end of its name. For headphones on a USB interface that might read "Speakers (your interface name) (loopback)".
  3. Click that entry.

Audacity 4 Audio setup menu with the Recording device list showing loopback entries Every playback device appears a second time in the Recording device list, marked "(loopback)". The yellow highlights are part of the original screenshot.

The important part is choosing the loopback of the device you actually hear sound from. If you pick the HDMI monitor's loopback while YouTube plays through your headset, you'll record perfect silence. Not sure which one is active? Click the speaker icon in the Windows taskbar and check the output device shown there.

Some sound cards also offer a device called Stereo Mix, "What you hear" or similar. That records the same desktop audio and is a fine fallback if loopback misbehaves on your machine.

Plugged in a new headset after starting Audacity? Choose Audio setup > Rescan audio devices so it shows up in the list.

Step 3: Turn off input monitoring and silence the extras

Loopback captures everything your PC plays. That includes notification pings, chat sounds, a game in the background and Audacity's own playback. Before you record, close or mute whatever you don't want on the track.

Then check one setting that's easy to miss:

  1. Click the microphone button next to the playback controls to open the recording level panel.
  2. Make sure Enable input monitoring is unticked.
  3. Leave Show mic metering ticked so you can see the level.

Audacity 4 recording level panel with the microphone button and the Enable input monitoring checkbox The microphone button opens the level panel. Input monitoring must stay off for loopback recordings.

Why? With monitoring on, Audacity plays back what it records, and loopback records what's played. You get an echo loop that turns into a howling mess within seconds.

Step 4: Start playback first, then hit Record

This order matters more than you'd think. WASAPI loopback can record a silent stream, but it can't record when there's no stream at all. If nothing is playing when you press Record, Audacity may refuse to start or capture nothing.

  1. Start the video, stream or song you want to capture. Pause it at the beginning if you want a clean start.
  2. Press the red Record button in Audacity.
  3. Resume playback in the other app.
  4. When you're done, press Stop in Audacity.

Watch the meter while recording. The level panel shows a dB scale from -60 to 0. If the meter keeps hitting the right end and turns red, or the waveform looks like a flat block, you're clipping, and that distortion can't be fixed later. Lower the volume in the source app or in the Windows volume mixer and do a second take. A recording that sits a little low is far less of a problem: you can raise it afterwards with the Amplify effect.

Trim silence at the start and end by selecting it in the waveform and pressing Delete.

Step 5: Export to MP3 or WAV

A saved Audacity project (.aup3) is not an audio file other apps can play. For that, you export.

  1. Choose File > Export Audio....
  2. Pick the format: MP3 for small files you want on a phone or in a playlist, WAV for full quality and further editing in another program.
  3. Choose a file name and location, then confirm the export.

A few tips: mono is enough if you only recorded speech. If you need lossless quality but WAV files are too big, FLAC or WavPack shrink them by up to half without losing anything. And if file size matters most, Opus and M4A (AAC) usually sound better than MP3 at the same size. Some formats need the free FFmpeg library installed.

Want to keep editing later? Use File > Save Project > Save Project as well. Keep that project on an internal drive, not a USB stick or network share: Audacity needs fast, uninterrupted disk access while it works.

If you still record silence

  • Check that Host is still Windows WASAPI. Switching devices sometimes leaves you on the wrong host.
  • Confirm that the loopback device matches the output Windows is using right now.
  • Make sure something is actually playing before you press Record.

Our verdict

Audacity 4 is a great free tool for anyone who needs to save podcasts, webinar audio or their own stream sound on a Windows PC, and the loopback route needs no extra drivers. Do one thing today: open Audio setup, set the host to Windows WASAPI and pick the loopback of your headphones. Record a ten-second test with input monitoring off, and you'll know the setup works before the important moment comes.

Related on UpdateStar

about author